home *** CD-ROM | disk | FTP | other *** search
- Installation Guide For CD
- =========================
-
- 1) Install the VGA card into your PC properly
- 2) Power on your PC
- 3) Launch the Micorsoft Windows
- 4) Insert CD into CD-ROM drive: . (Assume your CD-ROM drive is on drive D:,
- if it is not, change D: to other drive letter.)
- 5) Run D:\mssetup.exe
- 6) The Setup program will detect the VGA chipset
- and Windows version, and display a setup window.
- 7) Follow the on-screen instructions to complete
- the installation.
-
- Special note for Windows 95 users
- =================================
-
- Due to the plug & play feature of Windows 95, if it is the first time you
- install a new VGA card and then launch Windows 95, Windows will find a
- new device is installed and ask you to insert the driver diskette.
- In this case, please insert the Setup CD into CD-ROM.
- (Assume your CD-ROM drive is on drive D:,if it is not, change D: to other drive letter.)
- then input the driver source as
-
- D:\Driver\S3Vga\S3TRIOV\WIN95 (if you install a S3 Trio64V+ card) or
- D:\Driver\S3Vga\S3TRIOV2\WIN95 (if you install a S3 Trio64V2 card) or
- D:\Driver\S3Vga\S3VIRGE\WIN95 (if you install a S3 ViRGE/DX/GX card)
-
- After that, Windows will prompt you again to select the device type, please select
-
- "S3 Inc. Trio64V+ PCI" (if you install a S3 Trio64V+ card) or
- "S3 Inc. Trio64V2 PCI" (if you install a S3 Trio64V2 card) or
- "S3 Inc. ViRGE/DX/GX PCI" (if you install a S3 ViRGE/DX/GX card)
-
- then Windows will copy the driver files and ask you to restart Windows,
- you need to choose 'OK' to restart Windows so that the new driver will take effect.
-
-